The pile guidance structure designed for the extension of the quay on piles to be executed by Etermar in the port of Paita, Peru, has already begun to operate with the driving of the first piles next to the existing pier.
Maritime projects using movable formwork
(Only english version) See all the magazine e-maritime: Maritime projects using movable formwork
Renovation works of the Club de Mar, Palma
The complete renovation of the Club de Mar has started and the works will be expected to finish in 2022. They will be carried out by the construction companies FCC and the Mallorcan Vopsa, and will turn this port into a the most modern in the whole Mediterranean (Club...
Finishing the work Capping beam Palma de Mallorca Port
We are finishing the work in the Poniente quay, Palma de Mallorca Port, with our special maritime formwork, capping beam formwork. See the last pictures.
Capping beam installed in Gävle Port
We are starting the works in Gävle Port pouring the first setting (12m) of capping beam over piles screen. Everything goes well!
Works keep going ahead in Maputo Port
The status of our self-launching falsework patented is really good and works go ahead. The closing phase of the dock begins with the assembly of the structure for the edge zone. http://www.portmaputo.com/
Single arm friction grippers for La Esfinge Port
Last test before loading two single arm friction grippers for La Esfinge Port in Las Palmas de Gran Canaria. They will be in charge of the movement and positioning of 5 tn and 8 tn cubic blocks for the protection of the coast. This model of gripper has been supplied...
Sheet pile wall in Caucedo Port
The first phase guiding structure is already prepared to start driving the piles for the construction of the sheet pile wall in Caucedo port, Santo Domingo.
Starting a new capping beam project in Palma
Starting capping beam in the North-west Quay in Palma de Mallorca (Spain). The first segment of the capping beam in the North-west Quay in Palma de Mallorca has been built after a series of initial efforts, and the generation of some auxiliary elements to adapt the...
Work progress capping beam in Haifa Port
The capping beam of the alignment Q8 in the port of Haifa is finally finished, in the alignment Q7 remains only the last segment to be poured and two of the formworks have been assembled to work simultaneously in the Q6 to speed up the construction of the same.